ZUMEX Speed Up Benutzerhandbuch Seite 62

Configuration
Your Zumex Speed juicer enables you to set parameters to your liking.
Use the electronic device to choose and program the operating mode of your machine. With it, you can
control attributes and functionalities following the MENUS enclosed.
To enter the MENU press the STOP and MODE buttons for at least 2 seconds and enter the default
PIN (0000). Then press OK button for at least 2 seconds to confirm the PIN.
After entering the menu, you can set:
LANGUAGE: You have a choice of 23 available languages.
PIN: See or change the current PIN so that nobody else can change the machine parameters.
COUNTER: See total or partial counter of the machine. Reset the partial counter, visible on the
main screen. To reset the machine counter, press STOP + START for 3 seconds until the counter
indicates 0000000.
Ascending or descending CREDIT: You can program the machine credit so the machine can
be stopped, in ascending order or descending order, until the machine has been programmed
again.
MODE LOCKING SYSTEM: You can get the machine to only work in Automatic or Professional
and even so the number of oranges or volume to be squeezed cannot be changed, so that it only
squeezes the quantity set by you.
MANUAL MODE (Help mode): Some machine models have an actuator or an auxiliary operating
sensor. This can be annulled by selecting the MANUAL mode. [Self Service Model: SS Tap Up
(44U), SS Tap S +plus (44+) and Cooler Model: Level detector (56)].
WASTE LIMIT: You can activate an alarm so that the machine will stop when the desired number
of oranges has been squeezed. Thus, you will know when the waste bin has to be emptied.