Herunterladen Diese Seite drucken

Parkside Performance PRDSP 20-Li C2 Bedienungs- Und Sicherheitshinweise Seite 27

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 160
NOTE
The basket filter 
u
that can clog or damage the pump
from entering the spray tank.
Al ays reinsert the basket filter
u
before reinstalling the spray tank
over 
.
8 ]
[
Use only with plant protection
u
products approved by local/
national regulatory authorities for
plant protection products for use
with backpack sprayers.
B
solution
1. Carry out a test run with fresh water.
Check all parts of the product for
leaks.
Filling a clean spray tank
1. Stand the spray tank 
surface.
2. Unscrew and remove the spray
tank over 
. Check if the basket
[
8 ]
filter 
is orre tly pla ed
[
]
3. Carefully pour up to 1  litres of the
spray solution into the spray tank 
4. After filling, fit the spray tank
over 
. Tighten the spray tank
[
8 ]
over firmly.
NOTE
Fix a tag on the product to note
u
what chemical is used.
WARNING!
m
Never attempt to fill the spray
u
tank 
while carrying it.
[
3 ]
Changing the spray material
If any spray material is left in the spray
tank 
:
[
3 ]
1. Uns re the spray tank over 
remove the basket filter 
prevents debris
[
]
on a level
3 ]
[
ig. E .
3 ]
[
and
8 ]
[
.
[
]
2. Pour the spray material from the
spray tank 
[
3 ]
approved for chemicals. Do not store
chemicals in the spray tank for a
prolonged period.
3. Use clean water to clean and rinse
the spray tank 
A small amount of mild household
detergent may be added. 
4. Pour in the new spray material
see " illing the tank" .
˜ Operation
˜ S
ig. B
Switching the product on sets the
product into standby. The product does
not spray until the trigger 
while the product is switched on.
Switching on:
Press the on o s it h 
o
Increasing the pressure
Press the pressure selection
o
button 
.
[
]
The pressure increases each time
o
the button is pressed, until setting 6,
.
then the pressure returns to setting 2.
S
Press the on o s it h 
o
The product is equipped with a charge
level indi ator 
[
harging level of the battery pa k 
while the battery pack is inserted in the
product. When the product is switched
on, the charge level indicators light up.
Charge level
indicator
Red/orange/green
Red/orange
Red
into a container
and accessories.
3 ]
[
is squeezed
[
]
.
[
]
again.
[
]
. This indicates the
]
[
Charging
level
Maximum
Medium
Low
GB
]
25

Werbung

loading

Diese Anleitung auch für:

465838 2404