Parkside Performance PRDSP 20-Li C2 Bedienungs- Und Sicherheitshinweise Seite 14

WARNING!
m
The vibration and noise emissions
u
during actual use of the power tool
an di er from the de lared values
depending on the manner in which
the tool is used, especially what
kind of workpiece is processed. Try
to minimise exposure to vibration
and noise. Examples of measures
to reduce vibration include wearing
gloves when using the tool and
limiting working time. All parts of
the operating cycle must be taken
into account (e.g. times when the
po er tool is s it hed o and
when it is running idle in addition
to the trigger time).
Safety instructions
˜ General power tool safety
warnings
WARNING!
m
Read all safety warnings,
u
instructions, illustrations and
this power tool. Failure to follow
all instructions listed below may
result in ele tri sho k, fire and or
serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety
1. Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
12 GB
2. Do not operate power tools in
explosive atmospheres, such as in
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
3. Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety
1. Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
2. Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
3. Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
5. When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of
a cord suitable for outdoor use
reduces the risk of electric shock.
6. If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.