Herunterladen Diese Seite drucken

Parkside Performance PRDSP 20-Li C2 Bedienungs- Und Sicherheitshinweise Seite 25

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 160
Insert the desired nozzle
o
a
essory 
into one end of the
[
]
plasti nozzle pipe 
Push the O ring 
o
and the union nut 
thread on the nozzle a
Turn the union nut 
o
direction to tighten it on the thread of
the nozzle a
essory 
Choosing the suitable nozzle
accessory
Nozzle
an nozzle 
Double
head
nozzle
Single
head
nozzle
Mist
nozzle
NOTE
Only use the nozzles and filters
u
supplied with the product.
˜ Mixing the spray solution
WARNING!
m
Mix the chemicals strictly
u
in accordance with the
manufacturer's instructions.
Incorrect mixtures may produce
toxic fumes or explosive solutions.
Mix only the amount of liquid you
u
need for the application.
.
[
]
, se urity ring 
[
]
[
towards the
[
]
essory 
.
[
]
in a clockwise
[
]
.
[
]
Application
Uniform spray
pattern
Spraying large
areas
Spraying large
crops
igh o rate
Spraying small
areas
Spraying large
crops
Spraying mist
igh o rate
WARNING!
m
Risk of accidental contact of
u
spray materials with skin and
]
eyes! Always wear appropriate
personal protection equipment
as instructed by the chemical
manufacturer when using,
preparing, handling, spraying,
or disposing of chemicals. This
equipment includes at least
goggles, gloves, respiratory
protection and protective clothing.
Never spray liquid plant control
 
chemicals undiluted.
Prepare solution and fill the
 
spray tank 
well-ventilated locations.
Mi and fill only in areas here spray
 
spills can be easily contained.
ave su
 
to adsorb any spills immediately.
Prepare a quantity of solution
 
su
ient only for the job at hand so
that nothing is left over.
Do not mi di erent hemi als
 
unless such mixture is approved by
the manufacturer.
Liquids to be sprayed must be as
 
thin as water. Thicker liquids cannot
be sprayed properly.
Avoid contaminating the
 
environment, the water supply and/
or public sewer systems with the
spraying agent.
Any unused leftovers of spraying
 
agents must always be collected in
a suitable container and dis-posed
of by local or national regulatory
authorities.
Avoid any direct contact with
 
spraying agents. In case of contact
with sprays, immediately rinse the
a e ted parts of the body ith plenty
of clean water. Seek medical advice
if needed.
outdoors only or in
3 ]
[
ient spare rags available
GB
23

Werbung

loading

Diese Anleitung auch für:

465838 2404