Merach MR-R11 Benutzerhandbuch Seite 27

INSTRUCTION OF MONITOR
VR Calibration Mode:
1. In standby mode, press "MODE+RESET" for 3 seconds to enter VR Calibration Mode.
2. The TIME window displays "L ", and the DISTANCE window shows the current actual VR
AD value (Figure 42). Adjust the VR to the first segment and press the ENTER key to
confirm.
3. After confirming the VR value for the first segment, the TIME window displays "H",
and the DISTANCE window shows the current actual VR AD value (Figure 43). Adjust
the VR to the highest segment and press the ENTER key to confirm.
4. After setting the VR values for the first segment and the highest segment, the
electronic display will restart, dividing the set values into 10 equal segments.
EN 19
Figure 42 Figure 43