Merach MR-R11 Benutzerhandbuch Seite 25

INSTRUCTION OF MONITOR
(2) TARGET DISTANCE:
A. Switch to select the TARGET DISTANCE function; the display shows TARGET constantly lit, and the
DISTANCE window blinks (Figure 26). Press MODE KEY to start the DISTANCE setting function.
B. The display shows "SET" constantly lit, and the DISTANCE window blinks 0 (Figure 27). Press SET
to set the target distance, with a range of 0 to 9990, cyclically set. Press MODE KEY to confirm;
the buzzer sounds for 0.5 seconds and enters exercise mode.
C. The LCD screen shows "TARGET" and "DISTANCE" interactively for two seconds (Figure 28 to
Figure 29), and all values start counting display based on calculation values, with the display
switching every 5 seconds.
(3) TARGET CALORIES:
A. Switch to select the TARGET CALORIES function; the display shows TARGET constantly lit, and the
CALORIES window blinks (Figure 30). Press MODE KEY to start the CALORIES setting function.
B. The display shows "SET" constantly lit, and the CALORIES window blinks 0 (Figure 31). Press SET
to set the target CALORIES, with a range of 0 to 9990, cyclically set. Press MODE KEY to confirm
and enter exercise mode.
C. The LCD screen shows "TARGET" and "CALORIES" interactively for two seconds (Figure 32 to
Figure 33), and all values start counting display based on calculation values, with the display
switching every 5 seconds.
EN 17
Figure 26 Figure 27
Figure 30 Figure 31
Figure 28 Figure 29
Figure 32 Figure 33