Merach MR-R11 Benutzerhandbuch Seite 21

INSTRUCTION OF MONITOR
Instructions for Use
1. Power On
After the electronic display is powered on (or by pressing MODE/RESET for 3 seconds), a
2-second BUZZER beep, and a 2-second full LCD display, the device enters standby mode.
2. Standby Mode
A. After powering on, the electronic display enters standby mode, cycling through
MANUAL, INTERVAL, TARGET, TIME, TIME/500m, DISTANCE, CALORIE, PULSE, SPM,
WATT, TOTAL STROKES, STROKES in SCAN mode, displaying each for 1 second.
B. In standby mode, if no key is pressed, no RPM signal is received, and no heartbeat
signal is input, the device enters sleep mode after 4 minutes.
3. Exercise Completion Screen
A. After completing exercise, the meters display "STOP" blinking. The electronic display
shows the exercise completion values, cycling through the window for 5 seconds,
displaying real-time pulse values.
B. Under the exercise completion screen, pressing the MODE KEY allows another
exercise session.
C. Under the exercise completion screen, pressing the RESET KEY returns to the standby
screen.
D. If no key is pressed or exercise is not resumed within 4 minutes, the display returns to
the standby screen.
4. Exercise Pause Screen
A. During exercise, pressing the MODE key pauses all calculations on the electronic display,
and the PULSE shows real-time heartbeat values (Figures Four-Five).
B. While paused, pressing the MODE key resumes counting. Pressing the RESET KEY
during pause returns to the standby screen. If no key is pressed or the exercise is not
resumed within 4 minutes, the display returns to the standby screen.
5. VR Adjusting Display Screen
A. In standby and exercise modes, press the SET
button to enter the resistance display screen.
The display shows the current resistance value
"LEVEL 01~10" (LEVEL 01). The resistance
value will change as VR is adjusted (LEVEL 05).
Press the SET key again to exit the resistance
adjustment screen and return to the standby or
EN 13
exercise screen.
B. In the exercise screen, enter resistance
adjustment without affecting exercise
functionality. Exercise values continue counting.
LEVEL 01 LEVEL 05