Merach MR-R11 Benutzerhandbuch Seite 26

INSTRUCTION OF MONITOR
(4) TARGET STROKES:
A. Switch to select the TARGET STROKES function; the display shows TARGET constantly lit, and the
STROKES window blinks (Figure 34). Press MODE KEY to start the STROKES setting function.
B. The display shows "SET" constantly lit (Figure 35), and the STROKES window blinks 0. Press SET
to set the target STROKES, with a range of 0 to 9990, cyclically set. Press MODE KEY to confirm
and enter exercise mode.
C. The LCD screen shows "TARGET" and "STROKES" interactively for two seconds (Figure 36 to
Figure 37), and all values start counting display based on calculation values, with the display
switching every 5 seconds.
Figure 34
(5) TARGET PULSE:
A. Switch to select the TARGET PULSE function; the display shows TARGET constantly lit, and the
PULSE window blinks (Figure 38). Press MODE KEY to start the PULSE setting function.
B. The display shows "SET" constantly lit (Figure 39), and the PULSE window displays the preset
value 100, blinking. Press SET to set the target PULSE, with a range of 30 to 230, cyclically set.
Press MODE KEY to confirm and enter exercise mode.
C. The LCD screen shows "TARGET" and "PULSE" interactively for two seconds (Figure 40 to Figure 41),
and all values start counting display based on calculation values, with the display switching every
5 seconds.
Figure 38
Figure 35 Figure 36
Figure 39 Figure 40
Figure 37
Figure 41
EN
18