Cleaning the Drain Filter
The drain filter is located at the back of the charging station interior compartment and
catches solid detritus and dust that could otherwise clog the pipe that drains used
water into its tank.
1.
Remove the drain filter from the compartment.
2. Wash it in warm water with a soft cloth. You may use some pH-neutral detergent
on a soft cloth. Rinse and wipe dry.
3. Return the filter to its place and push slightly until you hear a click.
Warning:
Do not use the charging station without a properly installed drain filter.
Operating without a filter may damage the station.
EN - 23
EN