App Features; Cleaning And Maintenance - Siguro Sgr-Rv-S900B Bedienungsanleitung

EN
2. In the app, tap the "+" at top right, then select "Add Device".
3. Swipe down on the screen to the "Add Manually" option. On the next screen, select
"Small Appliances", then "Robotic Vacuum Cleaner (Wi-Fi)".
4. On the next screen, select the Wi-Fi network and enter your password. Tap "Next".
5. If prompted to reset Wi-Fi, press and hold
The button backlight will flash. In the app, confirm the buttons are flashing.
6. The vacuum cleaner will be automatically added to the device list. Tap "Done" to
display the vacuum cleaner controls.
Wi-Fi Reset
To reset the built-in Wi-Fi module, press and hold
simultaneously for 3 seconds. A chime will sound and the Wi-Fi module will reset.
Reset Wi-Fi when:
• prompted to do so in the app;
• automatic and manual addition of the vacuum to the in-app device list both failed;
• your Wi-Fi password changed;
• your Wi-Fi configuration changed;
• you need to associate the device with a different user account.
Announcement Volume and Language
Some of the vacuum cleaner's actions are accompanied by voiced reports. The default
reporting language is English. You can change the reporting language and volume or
turn verbal reporting off in the app.

App Features

The app contains advanced settings for the vacuum cleaner, cleaning modes, etc. Con-
trols available in the app include:
• switch between simple vacuuming and vacuuming with floor wiping;
• water tank refill and mop soaking frequency;
• operating mode selection – low noise / standard / high power;
• cleaning mode selection: cleaning by room, local area cleaning, spot cleaning, etc.;
• setting restricted areas and virtual walls;
• warm water rinse for mops;
• home map creation, real-time update and reset;
• scheduled cleaning;
• setting the water flow rate for floor wiping;
• "Do Not Disturb" mode;
• warning and error messages, etc.

CLEANING AND MAINTENANCE

Before any cleaning or maintenance, first power off the appliance and unplug the
adapter from the wall socket.
For best cleaning efficiency and service life, the vacuum should be cleaned after each
use.
and simultaneously for 3 seconds.
and on the vacuum cleaner
EN - 18