Charging Station; Charging The Battery - Siguro Sgr-Rv-S900B Bedienungsanleitung

The rotary brushes are designed for cleaning smooth floors. They allow efficient clean-
ing in corners and along wall and furniture edges. When vacuuming carpets, make
sure to first remove the rotary brushes. To do so, reverse the installation procedure
described above.

Charging station

The charging station can:
• automatically charge the vacuum
cleaner;
• empty the dust container;
• top up the water tank;
• clean and dry mops.
Keep the station freely accessible so that
the vacuum cleaner can easily locate it
and dock.
Place the charging station on a hard, level,
dry surface within reach of mains power.
We recommend placing the station by the
wall.
For reliable docking, the vacuum should
have 0.5 m (3 ft) of space to either side and
1.5 m (6 ft) in front of the charging station. This space should be clear of obstacles that
might foul up the vacuum's navigation and docking procedure.
Plug the power cord connector into the socket at the back of the charging station.
Plug the other end into a properly grounded mains outlet. Lay the power cord so as
to keep people from tripping on it, the vacuum's brushes from catching on it, and to
keep it away from hot or sharp objects, etc.
During prolonged disuse, unplug the charging station and securely store it.

Charging the Battery

The vacuum needs to be charged to full before first use. Proceed as follows:
1. Make sure the charging station is well placed and plugged in.
2. Long-press for 3 seconds to power on the appliance. Wait for the backlight on
the vacuum cleaner buttons to turn on.
3. Insert the vacuum into the charging station so that the charging contacts on the
bottom of the vacuum touch those on the charging station. Once there is electrical
contact, charging begins automatically.
4. While the vacuum cleaner is charging, its button backlight flashes slowly.
5. Once full charge is reached, the buttons will glow steadily.
EN - 13
EN