Herunterladen Inhalt Inhalt Diese Seite drucken

Siguro SGR-RV-S900B Bedienungsanleitung Seite 22

Robotersauger
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

EN
Cleaning the Castors
Regularly remove hair and tangles from
the main and front castors. Use the sup-
plied cleaning brush.
Cleaning the vacuum body
Wipe the outer body of the vacuum with
a clean, dry cloth.
CHARGING STATION
Cleaning the Clean Water Tank
1.
Open the charging station lid and remove the clean water tank.
2. Open the lid and empty the tank.
3. Wash the tank in warm water with a soft cloth. You may use some pH-neutral
detergent on a soft cloth. Rinse and wipe dry.
4. Fill the tank with clean water up to the MAX line.
5. Close the lid. Make sure the lid locks have engaged and the lid is secure.
6. Return the tank into the charging station and close the lid.
Cleaning the Used Water Tank
1.
Open the charging station lid and remove the used water tank.
2. Open the lid and empty the tank.
3. Wash the tank in warm water with a soft cloth. You may use some pH-neutral
detergent on a soft cloth. Rinse and wipe dry.
4. Close the lid. Make sure the lid locks have engaged and the lid is secure.
5. Return the tank into the charging station and close the lid.
Cleaning the Charging Station Interior
1.
In the app, tap Station Interior Cleaning.
2. The vacuum will automatically undock from the charging station.
3. A small amount of water will release into the station interior.
4. Using a soft brush, remove dust and dirt from the interior, especially from the soft
nubs used for mop cleaning.
5. After about 3 minutes, the water will automatically drain into the used water tank.
Once drained, wipe the interior with a soft, dry cloth.
6. The vacuum will then automatically return to the charging station.
EN - 22
Inhaltsverzeichnis
loading

Inhaltsverzeichnis