Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Water level switch installing plate
A.
Water supplying pipe
B.
Water charging tank: Approximate 3.5 litters volume
C.
Water outlet control valve of water charging tank
D.
Water tank for water circulation: Approximate 0.9 litters volume
E.
Ice full detecting board: Use to detect the inner cabinet is full of ice or not,
F.
and to check the ice-harvest process is over or not.
Water circulation pump
G.
Water drain pipe of the water tank: When ice-making, this silicone pipe
H.
should be
clamped in the slot of the water tank wall; And when draining the water, this
pipe should be pulled out and expand completely.
Ice full detector
I.
Water level detecting switch
J.
Evaporator (ice-making module)
K.
Water dividing pipe: With eight little holes, water will flow out from these little
L.
holes. And if no water flows out, can be disassembled and cleaned.
3).OPERATION PANEL
A. LCD display window
1、Unit ON or OFF state symbol: When the unit is turned off(standby mode),
this symbol flashes, and when the unit is working, the symbol will keep
lighting on.
2、Ambient temperature and ice-making countdown time display
3、Ice-making setting and Timer setting display
4、Error code：E1 means that the ambient temperature sensor is faulted E2
means that ice-making process is abnormal；
5、Light symbol: When this symbol displays, the LED light inside the cabinet
will be on；
6、Water flowing and water absence symbol: If the arrow of this symbol
flashes, means the water is flowing in to the water tank; And if the whole
symbol keeps on, means there is no enough water to start the ice-making
process.
7、Ice-full display: When the ice storage cabinet is full of the ice cube, this
symbol will display, and the unit will stop ice-making process.
8、Ice making and harvest display: When the ice cube symbol keep rotation,
means the unit is making the ice; And if the symbol flashes, means the
unit is during the ice harvest process.
9、Self-cleaning display.
7
Werbung
