Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The ice scoop should be washed regularly. Wash it just like any other food
container.
DO NOT use solent cleaning agents or abrasives on
tthe interior,These cleaners may transmit taste to the
ice cubes,or damageor discolor the interior.
Ice Making Parts Cleaning
During the using, periodically to clean these main system of
your ice-maker.
Repeat above step to clean the water tank and other inner parts of the unit.
1.
2. Especially, to the water dividing pipe on the evaporator, when the
compressor and the water pump run normally, but if there is no water flowing
out from the water dividing pipe or the water flowing is very small, please
discharge this water dividing pipe to clean carefully. Clean each little holes
on the water dividing pipe displayed in the following illustration, make sure
each hole is not clogged by something, then install back to the original
location.
The length of cleaning period is related to your water quality. And drain the
3.
water more frequently, the unit and its water pump can work much longer.
When there are ice cubes on the surface of the evaporator, but can't fall off
4.
easily, do not use the mechanical substance to remove it by force; Only
press the "ON/OFF" button for more than 5 seconds, the unit will enter the
ice melting process, after some while, thebig ice-cubes will fall down, then
turn off the unit and unplug the power cord to clean the surface of the
evaporator.
For the water tank and ice-full detecting plate
5.
21
Werbung
