Werbung
31
32
33
34
1
2
RX Frequency
3
TX Frequency
Program
Channel
4
5
6
Radio On/O
FM Radio
Radio Interrupt
•
OFF: Turn o the func on.
APO
•
30Min/60Min/120Min/240Min/480Min
Password
Input Password
•
VFO: Reset VFO only
Reset
•
ALL: Reset menu func ons and VFO
CH.NAME
Displays the channel name of the current channel
Displays the RX frequency of the current channel
Displays the TX frequency of the current channel
•
Low: At LOW power transmission
•
Middle At MID power transmission
Trans Power
•
High At HIGH power transmission
•
Narrow: 12.5 kHz bandwidth
Bandwidth
•
Wide: 25 kHz bandwidth
•
OFF
RX CTCSS
•
63-254.1
Turn on or o the FM radio.
On: When FM radio is used, you can s
or transmit on the channel.
O : When FM radio is used, the radio will not
permit a transmission or recep on.
Allow to set automa c power o when not used
for a period of 30Min/60Min/120Min/240Min
480Min of opera on. O : Turn o the func on.
This op on allows users to create a password
required for powering up a radio. Range 0 –
99999999
Resets the radio to factory defaults, with some
excep ons.
Allow reset the channel name, this func on is
only valid in channel mode.
Input the RX frequency by keypad, click the Menu
key to save. Press the EXIT key to move forward
and delete bits one by one.
Input the TX frequency by keypad, click the Menu
key to save. Press the EXIT key to move forward
and delete bits one by one.
Set up the TX power for current channel.
Selects between HIGH, MID, and LOW transmi er
power when in VFO/Frequency mode. Use the
minimum transmi er power necessary to carry
out the desired commu
nica ons.
Choose wide band or narrow band for the analog
channel.
Mutes the speaker of the transceiver invthe
absence of a speci c and con nuous sub-audible
signal. If the sta on you are listening to does not
transmit this speci c and con nuous signal, you
will not hear anything.
receive
Werbung
