Werbung
Allows you to view or reset the current channel alias as follows:
1. Press
+[4] to enter Program Channel.
2. Press
to select "CHL NAME";
3. Press
to enter the channel alias edi ng interface, and you can perform the following opera ons:
-Press # key to switch input method, switch between numeric, alphabe c and pinyin input method.
-Press 1 to input symbols such as punctua on or brackets;
-Press 2-9 to insert le ers or numbers.
-Press 0 to insert a space.
4. Press
to save the se ngs and return to the previous menu.
7.4 GPS func on
Op onal features that require hardware support.
The posi on system is a typical DTMF calling applica on. For the method of se ng call codes, call names, and local IDs, please refer to
"Signaling Calls".
It is necessary to ensure that the radios that receive and send GPS loca on informa on operate on the same frequency or channel, and are set
to the main frequency band.
In GPS mode, you can only view loca on informa on and cannot make normal calls. Voice intercom must exit GPS mode in order to proceed.
You can set the system me, GPS on/o , me zone, and GPS mode through the posi on system menu. Press and hold
and request loca on informa on.
7.4.1 Posi on On/O
In standby mode, press
·
O : Disables the posi on system.
On: Ac vates the posi on system and the screen displays the
·
7.4.2 GPS Informa on
key to enter the main menu >> GNSS >> GNSS On/O .
icon.
key to view, share,
Werbung
