Werbung
Frequency Mode (VFO): Used for a temporary frequency assignment, such as a test frequency or quick eld programming if permi ed.
Channel Mode (MR): Used for selec ng preprogrammed channels.
Ex 1. Programming a Channel Repeater O set with CTCSS Tone
EXAMPLE New memory in Channel 28:
RX = 432.55000 MHz
TX = 437.55000 MHz (This is a (+ 5) O set)
TX CTCSS tone 123.0
(1) Press the
key to switch between menus.
(2) Press [VFO/MR] key to set the radio to VFO mode, and the VFO icon is displayed on the li .
(3)
[3]
[7]
(4)
[3]
[1][3]
(5)
[3]
[1][4]
(6) Enter RX frequency (Ex. 43255000)
(7)
[3]
[1][7]
-->>
(8) Press [VFO/MR] key to return to the MR mode and the channel number will reappear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 28:
RX = 432.6500 MHz
TX CTCSS tone 123.0
(1) Press the
key to switch between menus.
(2) Press [VFO/MR] key to set the radio to VFO mode, and the VFO icon is displayed on the li .
(3)
[3]
[7]
(4) Enter RX frequency (Ex. 43265000)
(5)
[3]
[1][7]
-->>
(6) Press and hold the
123.0
[0][5]
[2]
[2][8]
123.0
[2][8]
key to return to the MR mode and the channel number will reappear.
Werbung
