Werbung
• Turn ANI, DTMFST, PTT-ID o and PTT-LT to 0ms (menu items 22 through 24).
• Turn o Squelch Tail Elimina on (Tail) features (menu items 26).
• Turn roger beep (ROGER) o (menu item 10).
Program channel
• Set bandwidth to Wide (menu item 4).
• Turn DCS and CTCSS o (menu items 5 through 8).
• Turn Signaling code o and SPK-Mute(menu items 9 and 10).
Chapter 7. Main Menu Func ons
The menu func on allows you to perform opera ons such as selec ng zones, Se ng SCAN, Radio Se ngs, Program Channels, and viewing
Radio Informa on.
7.1 Basic use
Use menus with arrow keys
(1) Press the
key to enter the main menu.
(2) Use the
or
keys to navigate between menu items.
(3) A er nding the desired next menu item, press the
(4) Use the
or
keys to navigate between the next menu items.
(5) A er nding the desired next menu item, press the
(6) Use the
or
keys to select the desired parameter.
(7) When you have selected the parameter to be set for a given menu item;
(8) To con rm your selec on, press
(9) To cancel your changes, press
(10) To exit out of the menu at any me, press the PTT key.
7.2 Using short-cuts
As you may have no ced if you looked at Appendix C, Menu de ni ons, every menu item has a numerical value associated with it. These
numbers can be used for direct access of any given menu item.
key again to select the menu item.
key again to select the menu item.
and it will save your se ng and bring you back to the main menu.
and it will reset that menu item and bring you out of the menu en rely.
Werbung
