Werbung
(3) Press
or
to select CTCSS;
(4) Press the
key to enter the CTCSS code, and scan the CTCSS code in sequence. When a valid CTCSS code is scanned, it stays on the CTCSS
code and the speaker is turned on.
(5) Press the
key to store the scanned CTCSS code and exit the scan to return to the previous menu. In standby mode, the
displayed on the top line of the screen. Press and hold the PTT key to make a callback.
To search for a DCS code, do the following:
(1) In VFO mode, enter a known frequency, such as 144.525.
(1) Press
key to enter menu>>Scan>>Scan Sub-Code.
(2) Press
or
to select DCS;
(3) Press the
key to enter the DCS code scanning, and scan the DCS code in turn. When a valid DCS code is scanned, it stays on the DCS
code and the speaker is turned on.
(4) Press the
key to store the scanned DCS code and exit the scan to return to the previous menu. In standby mode, the
displayed on the top line of the screen. Press and hold the PTT key to make a callback.
6.1.5 Sub-Code scan memory
In MR mode or VFO mode, the scanned CTCSS/DCS code can be stored as only TX CTCSS/DCS code, RX CTCSS/DCS code only, TX and RX
CTCSS/DCS code to replace the CTCSS/DCS code se ng of the current channel or frequency mode of the radio.
To save the se ngs of CTCSS/DCS code scan, the opera on is as follows:
(1) Press
key to enter menu >> Scan >> Scan Memory.
(2) Press the
key to enter the Scan Memory se ng, and press the
• ENCODER: The scanned CTCSS/DCS code will be stored as the transmi ed CTCSS/DCS code of the current channel or frequency mode
(only replace its transmi ed TX CTC/DCS).
• DECODER: The scanned CTCSS/DCS code will be stored as the receiver CTCSS/DCS code of the current channel or frequency mode (only
replace its receiver RX CTC/DCS).
• ALL: The scanned CTCSS/DCS code will be stored as the received and transmi ed CTCSS/DCS code of the current channel or frequenc y
mode (at the same me as the received and transmi ed Sub-Code).
(3) Press the
key to save the se ngs and return to the previous menu;
Note: Only when a valid CTCSS/DCS code is scanned and stopped, press the
or
key to select:
key to store the CTCSS/DCS code and replace the
icon will be
icon will be
Werbung
