14
Power on MSG
15
LCD DIR
16
MDF-A
17
MDF-B
18
Dual Watch
19
AutoLock
20
Alarm Mode
21
ID Veri ca on
22
SideTone
•
MESSAGE: The radio will display the characters set
up in PC so ware when powered on.
•
VOLTAGE: The power voltage is momentarily
displayed.
WELCOME
•
STAN: normal display
•
FAIL: Revers display
•
CH: Displays the channel number
•
NAME: Displays the channel name.
•
FREQ: Displays programmed Frequency
•
CH: Displays the channel number
•
NAME: Displays the channel name.
•
FREQ: Displays programmed Frequency
•
OFF Disable the dual-watch func on.
•
Double Wait Enable the dual-watch func on.
•
Signal Wait Enable the single-watch func on.
•
OFF Manual Lock. Long press the * key to lock the
keypad.
•
ON Auto Lock. Radio will auto lock the keypad when
standby for a while.
•
On Site The radio will emit siren locally, but will not
transmit any emergency signal to the control center.
•
Code+Sound The radio gives visible and audible
indica ons during emergency state.
•
Code+Sound(No) The radio gives no indica on
during emergency state, but will unmute its speaker
once it receives a call.
•
Code+Tone The radio transmits the emergency
signals to the control center rst, and then gives siren
locally with visible indica on.
Contact 1
Contact 80
•
DTMF: DTMF enabled/ disabled.
•
2 Tone: 2Tone enabled/ disabled.
•
5 Tone: 5Tone enabled/ disabled.
•
BDC1200: BDC1200 enabled/ disabled.
Allows edi ng of power-up messages on this unit.
Press MENU to enter message edi ng, press EXIT
to go forward to delete, and enter text or le ers
via the keypad.
STAN: normal display . FAIL: Revers display
[A] MR/Channel Mode Display Format.
[B] MR/Channel Mode Display Format.
Monitor [A] and [B] at the same me. The display
with the most recent ac vity ([A] or [B]) becomes
the selected display.
Press MENU key, then press the * key to unlock
the keypad.
This op on allows you to choose the type of
emergency. The op on speci es the type of alert
for the radio during emergency.
OFF: DTMF/2Tone/5Tone/BDC1200 disabled.
ON: DTMF/2Tone/5Tone/BDC1200 enabled.