Parkside Performance PKHAP 2058 A1 Bedienungsanleitung Seite 49

˜ Troubleshooting
Problem
The product does
not start.
The performance
of the product is
poor.
The product works
with interruptions.
˜ Disposal
NOTE
Dispose of the lubrication grease
u
separately from the product
according to local regulations.
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Observe the marking of the
packaging materials for waste
separation, which are marked
with abbreviations (a) and
numbers (b) with following
meaning: 1–7: plastics/20–22:
paper and breboard 0–98:
composite materials.
Possible cause
The battery pack
[
inserted.
The battery pack
[
discharged.
The on o s itch
[ 9 ]
defective.
The motor is defective.
Excessive pressure on the
product
Too little lubrication grease
in the SDS Plus chuck
Internal loose contact
The on o s itch
9 ] [
defective.
[ ]
Solution
is not Insert the battery pack
]
"Inserting and removing the
battery pack").
is Charge the battery pack
]
(see "Charging the battery
pack").
Contact our Service Centre
is
(see "Service").
Apply appropriate pressure on
the product.
Grease the SDS-Plus tool (see
[ ]
"Maintenance").
[ 1 ]
Contact our Service Centre
(see "Service").
is
Product:
The product incl. accessories and
packaging materials are recyclable
and are subject to extended producer
responsibility.
Dispose them separately, following the
illustrated Info-tri (sorting information), for
better waste treatment.
The Triman logo is valid in France only.
Contact your local refuse disposal
authority for more details of how
to dispose of your worn-out
product.
(see
[ ]
[ ]
GB/IE 47