Parkside Performance PKHAP 2058 A1 Bedienungsanleitung Seite 46

˜ Adjusting the speed
Press to choose between
[ ]
o
speed levels
You can adjust the speed while the
o
product is in operation.
Level Speed
1 Lowest speed
6 Highest speed
Rotational Drill
speed diameter
Low Large
High Small
˜ S
WARNING! Risk of injury due
m
to unintentional continuous
operation of the product!
Before inserting the battery pack
u
check that the on o s itch
works properly and returns to the
OFF position when released.
Switching on
1. Insert the battery pack
2. Press and hold the on o s itch
The LED ork light
you press and hold the on o s itch
S
1. Release the on o s itch
2. Wait until the product has stopped
before placing it down.
3. Remove the battery pack
product if you are leaving the product
unattended or if you have nished
working.
44 GB/IE
Materials
Hard
materials
(e.g. metal)
Soft
materials
(e.g. wood)
,
[ ]
9 ] [
.
[ ]
.
9 ] [
lights up while
[ ]
.
[ 9 ]
from the
[ ]
Continuous operation (for chiselling)
1. Press and hold the on o s itch
Press the locking button
simultaneously.
When you release the on o s itch
the product runs continuously.
2. To cancel continuous operation brie y
press the locking button
˜ Checking the charging level
of the battery pack on the
product
Press on the control panel
[ ]
o
The charging level of the battery
o
pack is indicated by illumination
[ ]
of the corresponding LEDs on the
charging level indicator
During operation, the charging level
o
of the battery pack
displayed on the charging level
indicator .
[ ]
Colour
Red, orange, green Fully charged
Red, orange
Red
Charge the battery pack
o
only the red LED on the charging level
indicator is illuminated.
[ ]
˜ Transport
S itch o the product and remove the
o
battery pack . Let all moving parts
[ ]
come to a complete stop.
Remove the attachment tool.
o
Always carry the product by the
o
handle .
[ ]
.
9 ] [
8 ] [
.
8 ] [
.
[ ]
.
[ ]
is permanently
[ ]
Meaning
Half charged
Needs to be
charged
when
[ ]