Adjusting The Settings On The Control Valve - Aqmos R2D2-32 Betriebsanleitung Und Programmieranleitung

10. Adjusting the Settings on the Control Valve

The control valve is operated via user-friendly electronics with an LCD display. During normal
operation, the current time and the remaining capacity until the next regeneration are displayed.
The capacity is shown in T (tons), where one ton equals 1,000 liters or 1 m³ of water.
We have already set the control valve to the "Volume Mode with Forced Regeneration" (meter
override). The water hardness to be removed must be adjusted to match the hardness level in your
area.
The operating mode must not be changed to prevent bacterial contamination. All the following
values have already been preset for you!
Parameter
1 LANGUAGE
2 REGION
3 REGENERATION
MODE
Opties
ENGLISH o. a. Language selection
METRIC Unit selection
Gallons (US) or Tons (1 Ton = 1000 L)
US
CALENDAR
In this mode, the system regenerates
after a fixed, pre-programmed number of
CLOCK
days at a specific time. The amount of
water consumed during the period is not
taken into account.
Abbreviation on the display:
CC (Calendar Clock)
In this mode, the system regenerates
METER
automatically after reaching a fixed, pre-
IMMEDIATE
programmed water volume.
Regeneration occurs immediately once
the set volume is reached.
Abbreviation on the display:
MI (Meter Immediate)
Beschrijving
7