Installation Step 3 - The Control Valve - Aqmos R2D2-32 Betriebsanleitung Und Programmieranleitung

Installation Step 3 – The control valve
3
1
1
1
2
4
1. Flow Direction Marking for Water
Inlet and Outlet
Arrows indicating the flow direction are
located on top of the connection piece!
1. Shut-off valves
(closed upon delivery, open after
installing the device!)
2. Locking clips
3. Water inlet
4. Water outlet
1. To insert the threaded pieces,
pull the locking clips upward from the
connection piece.
19