Aqmos R2D2-32 Betriebsanleitung Und Programmieranleitung Seite 13

"REG. DAYS" will appear.
Press the button " ". The display will start blinking.
Use the buttons " Use the buttons "
Save this entry by pressing the button " ".
Proceed to the next step by pressing the "
"REG. CAP" will appear.
Press the button " ". The display will start blinking.
buttons "
Use the buttons " Use the
Save this entry by pressing the button " ".
Proceed to the next step by pressing the "
"BACKWASH" will appear.
Press the button " ". The display will start blinking.
Use the Use the buttons " buttons "
R2D2-32: 01 Min.
R2D2-48: 01 Min.
R2D2-72: 01 Min.
Save this entry by pressing the button " ".
Proceed to the next step by pressing the "
"BRINE" will appear.
Press the button " ". The display will start blinking.
Use the Use the buttons " buttons "
R2D2-32: 28 Min.
R2D2-48: 35 Min.
R2D2-72: 40 Min.
Save this entry by pressing the button " ".
Proceed to the next step by pressing the "
"RINSE" will appear.
Press the button " ". The display will start blinking.
buttons "
Use the buttons " Use the
R2D2-32: 02 Min.
R2D2-48: 02 Min.
R2D2-72: 03 Min.
Save this entry by pressing the button " ".
Proceed to the next step by pressing the "
" to select 07.
" button.
" to select the capacity in tons (= 1000 liter). Zie pagina 13.
" button.
" to select the backwash time in minutes.
" button.
" to select the brine time in minutes.
" button.
" to select the rinse time in minutes.
" button.
11