Cooling Operation - Hitachi Ras-5182Ch Service

COOLING OPERATION
very high (over 80%) indoors, some dew may form on. the air outlet grille of the
cooling unit.
ee eae Press the FUNCTION selector so that the display. indicates
(Seder.
.
% (COOL). ae
Re
ar
Set the desired room temperature with the TEMPERATUR
buttons (the display indicates the setting).
The range of 25-28°C is recommended asthe
room. temperature for cooling. If the
E
OS. Hr... Min. ' temperature setting is 27°C, the room
's 5 temperature will be controlled at around 27°C.
© The temperature setting and the actual room temperaiure may
Q vary somewhat depending on conditions.
©
°CO@O ; Set the desired FAN SPEED with the FAN SPEED button (the
(A) display indicates the setting). ;
Ke © (AUTO) : The FAN SPEED is HI at first and varies to
WO) MED or LOW automatically when the preset
ca om ____ temperature has been reached. .
So () (3) (HI) : Economical as the room will become cool
quickly.
(MED): Quiet.
(LOW) : More quiet.
Press the © (START/STOP) button. Cooling operating starts
with a beep. Press the button again to stop operation. The
cooling function does not start if the temperature setting is
higher than the current room temperature (even though the
© (OPERATION) lamp lights). The cooling function will start
as soon as you set the temperature below the current room
temperature.
@ As the settings are stored in memory in the remote controller, you
only have to press the O (START/STOP) button next time.
-16-