Hitachi RAS-5182CH Service Seite 21

HOW TO SET THE TIMER
Setting the Current Time 7 Press the © (TIME) button.
~ (After you change the -
SELECT
batteries;
s l g s r
eiygl
(Timer
mode)
TIME
"(Current
time)
CANCEL.
N
® N Siar ers
' m4" mI
hte hens
soe yp NN
1 Press the 021 (SELECT)
button until the © (OFF) mark
blinks on the display.
'You can set the device to turn off
at the preset time.
7 Press the oS (SELECT)
button until the | (ON) mark
RESERVE
TIMER SET BUTTONS
blinks on the display.
@ For Heating, the device will turn on
before the set time.
@ Temperature be reached at the designated time. 68, . \: ee
For Cooling and Dehumidifying, the device will Cyercls aed
simply turn on at the designated time.
ON/OFF-Timer 7 Press the oS, (SELECT) 2 Set the turn-off time 3 Press the, 9, (SELECT)
button so that the © (OFF) with the HOURS and button so that the © (OFF)
= mark blinks and the | (ON) | MINUTES buttons. mark lights and the I (ON)
a mark lights in the display. mark blinks.
off (on) at the designated times.
@ The device will turn on (off) and
I
@ The switching occurs first at the > ay
a
é ' ® .
preset time that comes earlier. Oi | | Ot +
@ The arrow mark appearing on the » Saupe At-E OC) =» Nl aworP rr
display indicates the sequence of | Benes g OY) ] bee SIS eae
!
switching operations.
- How to Cancel Reservation
Point the signal window of the remote controller toward the cooling unit, and press the
© (CANCEL) button.
The ©(RESERVED) sign goes out with a beep and the © (TIMER) lamp turns off on the cooling
unit.
You can see only one of the OFF-timer,
ON-timer and ON/OFF-timer.
-20-