Hitachi RAS-5182CH Service Seite 76

Wireless remote controller
(220) 1) When the "Automatic"
operation mode is
selected, "Automatic"
pressing the fan speed
select button.
2) The room temperature
setting is not displayed.
3) Pressign the room
temperature control
button develops
transmit mark "A" and
sounds a receive sound
but does not display the
room temperature
setting.
When the room
temperature setting is "16",
pressing the room
temperature control button
"/" causes no transmission.
At "32", pressing "" causes
no transmission either.
The timer cannot be set.
The current time
disappears soon.
does not change by |
G29
1) When 'the operation
mode is "Automatic", the
fan speed is automati-
cally fixed to "Automatic".
2) At an."Automatic" opera-
tion, the room tempera-
ture setting is not dis-
played. —
The room temperature is
automatically set as fol-
lows.
At cooling
Set at 27°C.
At dehumidifying
Set to a temperature
slightly lower than the
room temperature.
Set at 23°C
3) At an "automatic" opera-
tion, the room tempera-
ture setting is not dis-
played.
However, every pressing
"N' or "v" button changes
1°C within the range of :
27+3°C when cooling
23+3°C when heating
The room temperature is
settable within the range of
16-32 and not beyond.
Is the current time set?
The time cannot be set
unless the clock is adjusted
correctly.
The current time disappears
soon and the timer setting
indication takes a
precedence.
-80-
The. room temperature
_sensing thermistor in the
indoor unit detects the room
temperature and, according
to the particular temperature,
automatically performs
_ "Cooling" or "Dehumidifying"
operation. —
The value indicated not at an
"Automatic" but manual
operation is not the actual
room temperature but the
room temperature setting.
When setting the current
time, its indication blinks for
approximately 3 minutes.