Cooling Operation - Hitachi Ras-18Gh5 Bedienungsanleitung

COOLING OPERATION

Use the device for cooling when the outdoor temperature is 22-42°C.
If indoor humidity is very high (over 80%), some dew may form on the air outlet grille of the indoor unit.
˚ C
RESET
C
˚
Downloaded from www.Manualslib.com
Press the FUNCTION selector so that the display indicates
1
(COOL).
Set the desired FAN SPEED with the
(the display indicates the setting).
2
Set the desired room temperature with the TEMPERATURE
button (the display indicates the setting).
3
The temperature setting and the actual room temperature may
vary some how depending on conditions.
Press the
with a beep. Press the button again to stop operation. The
START
cooling function does not start if the temperature setting is
STOP
higher than the current room temperature (even though the
as soon as you set the temperature below the current room
temperature.
As the settings are stored in memory in the remote controller, you
only have to press the
manuals search engine
(AUTO) : The FAN SPEED is HI at fi rst and varies to MED
automatically when the preset temperature has
been reached.
(HI) : Economical as the room will become cool quickly.
(MED) : Quiet.
(LOW) : More quiet.
The range of 25-28°C is recommended as the
room temperature for cooling.
If the temperature setting is 27°C, the room
temperature will be controlled at around 27°C.
(START/STOP) button. Cooling operation starts
(OPERATION) lamp lights). The cooling function will start
(START/STOP) button next time.
– 10 –
(FAN SPEED) button