Silvercrest SSWR C2 Bedienungsanleitung Seite 46

Fault
The product does not
automatically start cleaning at
the scheduled time.
NOTE: If the suggested solutions do not
solve the problem, proceed as follows:
Reset the product by switching it off and
o
back on again with
If the product still does not work after
o
this reset, contact the Service Centre (see
"Service").
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and
fibreboard/80–98: composite
materials.
46 GB/IE
Possible cause
The schedule entries were not
stored.
The schedule entries were
deleted when resetting
the product or changing
the batteries in the remote
control .
[ ]
The product is switched off.
The battery level is low.
The product cannot move.
.
[ 2 ]
Solution
Set the schedule again and
store the entries (see "Setting a
vacuuming schedule").
Switch the product on and
set the schedule again
(see "Setting a vacuuming
schedule").
Switch the product on.
Never switch off the product.
Always park the product in
the charging dock
it is always fully charged and
ready to use.
Switch the product off. Inspect
and clean the product. Remove
any foreign objects (see
"Cleaning and care").
Product:
The product incl. accessories and packaging
materials are recyclable and are subject to
extended producer responsibility.
Dispose them separately, following the illustrated
Info-tri (sorting information), for better waste
treatment.
The Triman logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when
it has reached the end of its useful
life and not in the household waste.
Information on collection points and
so that
5 ] [