Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Contact currently being measured is indicated by the swirling circle in the table and the
highlighting circle in the electrode array image.
•
After estimation of tNRI, value in c.u. is represented in the table.
•
User may skip selected channels by clicking "Skip Channel" during a measurement.
•
NRI Settings may not be adjusted while a measurement is ongoing. However, they may be
adjusted after the measurements have been complete or stopped.
•
Table will only show tNRI values for the most recent 3 NRI measurements. These are time
stamped with the most recent measurement at the top of the table.
•
Compliance limit is represented with a yellow vertical line in the EP Growth Function graph
when relevant.
•
EP Growth Function represents the neural responses from different levels that were used
to estimate thresholds.
•
By clicking on the view button the user can switch between looking at the electrode array
image and the individual response curves.
•
User can click on the "electrode contacts" in the electrode array image or the tNRI value in
the table to display EP Growth Function for that contact.
•
Clicking on the points in the EP Growth Function will bring up the individual responses
corresponding to that data point.
•
Prior measurements can be reviewed while measurements are ongoing. To resume dis-
playing the ongoing measurement, click on the contact currently being measured and the
most recently added point to the EP Growth function.
•
Click "Next" to advance to ESRT if using or use the navigation panel to select the desired
function.
16
Example contact to
be measured
Werbung
