Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Click "Next" to advance to Impedances or use the navigation panel to select the desired
measurement.
Impedances:
•
Click "Start" to measure impedances, conditioning will be performed prior to the first
impedance measurement.
•
Click "Conditioning" to rerun conditioning and measure impedances.
•
Click "Start" to only remeasure the impedances.
•
Table of impedance will show the values for the last three measurements only.
•
Color coded legend indicates Valid, Shorted or Open impedance; green, purple and
gold respectively.
•
Click "Next" to advance to NRI or use the navigation panel to select the
desired measurement.
NRI:
•
Electrode impedances must be measured prior to the start of NRI.
•
Click "Start" to measure NRI responses and estimate tNRI, i.e., threshold values.
•
tNRI Will be estimated for all selected contacts that have a valid impedance value.
•
Contacts to be measured are indicated by being colorized in the electrode array image
and having a blue-gray underscore under the contact number in the table.
•
Contacts that will not be measured are "grayed out".
15
Werbung
