Reset menu
The maintenance actions can always be carried out if necessary, even if they are not
displayed.
Touch the On/Off button
flashes and FILTER, CLEANING, and SERVICE appear on the display. Now touch the
measures that have been carried out and hold for approx. 3 sec. until they go out.
Then touch the flashing On/Off button
The next reminders for the measures performed are now displayed again in rotation.
CLEANING THE DEVICE
Caution! Make sure that the device is switched off and the power supply is
!
disconnected from the socket during all measures!
Cleaning the upper part of the device
Clean the upper part of the device with a dry cloth/cleaning brush or a slightly damp
cloth!
Caution! The upper part of the device must not be cleaned under running water!
Please do not use any cleaning agents.
Cleaning the display
Only clean the display with a dry cloth or a display cleaning cloth!
Caution! The display must not be cleaned wet or too moist! Please do not use any
cleaning agents.
(10) and hold for approx. 3 seconds until the display
(10) It now lights up continuously again.
EN
45