Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Display
Function
Sleep mode (8)
Switched on by a short touch
3 seconds.
On: The unit switches to speed level 1. The LED band is switched off.
Only the Sleep mode button (8) and the on/off button (10) lights up, with
reduced brightness.
By briefly touching the Sleep mode button (8), the following displays/
functions are available for approx. 5 seconds:
•
• WiFi (15) can be switched on/off
• LED band (9) can be switched on/off and dimmed.
• LED colors (12) can be changed.
Off: To exit Sleep mode, press and hold the Sleep mode button (8) for
approx. 3 seconds. All displays/functions light up in normal brightness
and are available.
Airwasher / Air Purifier mode (7)
Mode can be changed by briefly touching icon.
Airwasher mode: The appliance cleans the air and humidifies it. For
Airwasher mode, the water tray and the disk stack must be correctly
inserted into the appliance. The TURBO function (14) cannot be activa-
ted in Airwasher mode. The button (7)shows air particles on the left and
water droplets on the right.
Air Purifier mode: The appliance purifies the air but does not humidify
it. The TURBO function (14) can be activated. The button (7) only shows
the air particles on the left. We recommend emptying the water tray in
air purifier mode to prevent water from escaping from the appliance
when turbo mode is activated. The water tray can be replaced by the
four support parts (G) for a higher air purification performance.
Operation with support parts for higher air purification performance:
36
EN
and
buttons (6) for changing the speed level 1
Remove
water tray (F)
+ disk stack (E)
and switched off again by touching for
Attach support
parts (G) to the
lower part
Werbung
