Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONFIGURATION
& SMART LIFE APP
Hotspot mode
During initial startup, the device is automatically in hotspot mode. The hotspot mode
can be activated at any time by touching and holding the WiFi symbol (15) for 3 se-
conds. Hotspot mode is activated when the three reception bars of the WiFi symbol
light up in succession from bottom to top in the display
Activating WLAN
Make sure your smartphone or tablet is connected to your home WLAN network and
Bluetooth is turned on.
Install "Smart Life – Smart Living" App
Install the free "Smart Life – Smart Living" app on your smartphone.
Set up WiFi
After you have downloaded and installed the "Smart Life – Smart Living" app, please
open the app.
• Create a user account and log in.
• Tap "Add device" if your device appears in the app. Otherwise, tap +, "Add device",
"Small home appliance", "Humidifier (BLE +Wi-Fi)". Select your WiFi and enter the
WiFi password.
Please make sure that ...
• the device is assigned a radio network in the 2.4 GHz band by your router.
Unfortunately, radio networks in the 5 GHz band are not supported.
• Your router supports 802.11b/g/n.
• iOS version 11.0 or higher or Android version 6.0 or higher is installed. If
necessary, update the operating system of your smartphone or tablet.
If problems occur during WiFi setup, please refer to the corresponding section in the
"What if ...?" chapter. Further information at: www.venta-air.com
40
EN
.
Werbung
