Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9
Afterwards, switch off the unit, disconnect the power plug and remove the upper
part of the unit.
10 Empty out contaminated water.
11 Thoroughly rinse the water tray and disk stack.
12 Fill the water tray with fresh tap water up to the MAX. mark.
13 Fill the hygiene additive into the water tray (for dosage, see scale LW15 on the
back of the bottle).
14 Position the upper part of the appliance so that the gear wheels in the upper part
engage with the gears of the disk stack.
15 Plug in the power plug and switch on the unit.
16 Touch the CLEANING display (1) and hold it for approx. 3 seconds until it goes
out.
Change filter
The service life of the VENTA filter is approx. 1 year (with 24-hour continuous
operation). The filter service life depends on the number of operating hours and the
air quality in the room. The FILTER indicator (2) indicates when the filter needs to be
changed.
1
Switch off the device.
2
Disconnect the power plug.
3
Remove the upper part of the unit.
4
The locking mechanism of the two filter trays on the upper part of the appliance
unlock.
5
Remove both filters.
6
Remove the protective packaging from the new VENTA filters and insert the new
filters.
7
Close the locks again.
8
Position the upper part of the appliance so that the gear wheels in the upper part
engage with the gears of the disk stack.
9
Plug in the mains plug and switch on the unit.
10 Touch the FILTER display (2) and hold it for approx. 3 seconds until it goes out.
Pack the used VENTA filter in a bag and dispose of it in the household waste.
!
EN
43
Werbung
