Bosch BTH-RAD Bedienungsanleitung Seite 18

Radiator thermostat II [+M]
Independent operation
The radiator thermostat II [+M] can initially also be operated
independently, without an existing Smart Home system. Fit the device to
the radiator valve and insert the batteries.
As soon as this symbol is displayed, briefly press ○ ○ on the
rotary knob (D) to start an initial calibration. As soon as this is
completed, a temperature value is displayed (B).
The desired temperature can now be conveniently set by turning the rotary
knob (D) to the left (–) or right (+).
݅ Pairing mode for connection to Smart Home systems is started
automatically after each operation. The status LED will therefore flash
blue or orange at regular intervals for the first 3 minutes after each
operation. This does not have any impact on the control.
Configuration menu
The radiator thermostat II [+M] has its own configuration menu so that
simple settings can be made even without Smart Home app.
݅ To access the configuration menu, the device must be paired with a
Bosch or third-party Matter Smart Home system.
You can display the configuration menu by pressing ○ ○ for > 5 s.
By turning the control knob (D) to "+" or "–", the different menu items can
be selected. The menu items are listed below.
Confirm the selection by pressing ○ ○ once.
݅ To exit the configuration menu without making a selection, wait > 5 s
without pressing a button or press 2 × ○ ○ .
↑Contents
8-750-002-924 | V001 | 08/2024
English | 18
Bosch Smart Home