Bosch BTH-RAD Bedienungsanleitung Seite 13

Radiator thermostat II [+M]
Now follow the further instructions in the Bosch Smart Home app.
Flashing codes and displays
The status LED (C) and the display (B) provide useful information during
start-up and operation.
During start-up in the Bosch Smart Home system
Display Status LED
–
Flashes blue every
1.5 s
–
Flashes orange every
1.5 s
– Flashes green once
– Flashes red once
–
–
↑Contents
8-750-002-924 | V001 | 08/2024
Device status
Device is starting.
Pairing mode for Matter
third-party system is
active.
Switch to ZigBee mode
successful.
The device is currently
in ZigBee mode and is
ready for pairing with
the Bosch Smart Home
system.
Coupling with system
successful
Coupling with system
not successful
Device is ready for
calibration.
Device calibration is in
progress.
Recommended action
Please wait until the process is
completed.
First switch to ZigBee mode.
To do this, press ○ ○ for > 5 s until
the LED flashes orange.
The device can now be paired
with the Bosch Smart Home
system.
–
The pairing process can be
started in the Bosch Smart Home
app.
–
Reset the device to factory
settings and start the process
again.
Fit the thermostat to the heating
valve.
Press ○ ○ to start the calibration.
Wait until the process is complete
and the room temperature is
displayed.
Bosch Smart Home
English | 13