Create Advance Bedienungsanleitung Seite 8

Before assembling the oven, make sure you have all the necessary parts and tools. If any
parts are missing or damaged, do not attempt to assemble the appliance. Please contact
customer service for replacement parts.
1. Turn the pizza oven over and, with the help of a screwdriver, unscrew the screws located
at the bottom of the oven.
2. Then place the legs and screw them with the screws removed previously.
3. Once the legs are assembled, remove the protective films from the non-slip pads that we
provide and stick them on the legs. After return to the oven and place it on a flat, stable
surface.
4. Place the inner rack into the inner waste basket, then place the basket at the back of the
oven.
5. Insert the smoke extractor tube into the chimney slot and rotate it 45 degrees to prevent
it from falling during use.
E NGL I SH
8
MOUNTING