Dantherm RCV320 P1 Benutzerhandbuch Seite 42

42
2. Check to which drain (A/B) the condensate drain must be connected. The process is
depicted in the following figures.
1
Fig. 46: Condensate drain for operating mode A and B
1 Condensate drain for operating
mode B
3. Remove the plug of the drain to be used. Then connect the condensate drain hose and
secure it with the hose clamp provided. Do not use a screw clamp.
Fig. 47: Connecting the condensate drain hose
4. Ensure that the other condensate drain (1) is closed with a plug (2).
Fig. 48: Fitting the plug on the condensate drain
INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
2
2 Condensate drain for operating
mode A
1
2
Installation: Assembly