Dantherm RCV320 P1 Benutzerhandbuch Seite 34

Option 3
34
2. Turn the cabinet over to gain access to the main PCB.
Fig. 27: Turning the control unit
1. Loosen the three screws on the bottom of the unit and remove the front cover.
Fig. 28: Removing the front cover
2. A pin/lock is located behind the control unit that holds the main PCB in place. Press the
pin/lock (1).
ð The main PCB detaches from the control unit.
Fig. 29: Detaching the main PCB
3. Remove the main PCB from the control unit.
Fig. 30: Removing the main PCB
INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Installation: Access to the main PCB
b
a
b
a
1