Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Care - Dantherm Rcv320 P1 Benutzerhandbuch

Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 125

Maintenance and care

Maintenance
intervals
Filters – Alarm
and inspection
14
Preventive maintenance activities are required at regular intervals to ensure efficient and
optimal operation without unwanted failure and to ensure an expected service life of at least
10 years.
Note that the filter maintenance intervals may vary depending on the specific ambient
conditions. Also be aware and that moving parts are wear parts that must be replaced when
worn.
The factory warranty is only valid if it can be documented that regular preventive
maintenance activities have been carried out as prescribed. Proof can be provided by a
written logbook with a company stamp or similar.
The filters are the only parts that the user can maintain himself/herself. Maintenance of the
filter must be carried out at least at the following intervals:
Interval
six months
annually
The unit is provided with an integrated timer for the filter alarm which is activated every
12 months by default. The time period for the filter alarm can be changed via the remote
control or the PC tool.
When the timer expires, a filter alarm is triggered. An acoustic signal is emitted and the LED
under the   button is illuminated in orange. If the LED is illuminated in red, please refer to the
"Troubleshooting" section in the Installation and Service Manual for Professionals.
Please proceed as follows to inspect the filter and replace it if necessary:
1. Remove the filters and check them after the filter alarm has been triggered.
Fig. 2: Removing the filter(s)
2. Check the filters for dirt (after six months). Replace the filters if you notice heavy soiling or
clogging. Note: Always replace both filters, even if only one filter is clogged, to avoid an
imbalance in the airflow passing through the unit.
3. Replace the filters after 12 months, regardless of whether they are clogged or an alarm
has been triggered.
Maintenance and care: Week programs of the time switch
Task
Check filter(s). Replace filter(s) if
required.
Replace filter(s)
USER MANUAL
To be carried out by:
User
User
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rcv320 p2

Inhaltsverzeichnis