Dantherm RCV320 P1 Benutzerhandbuch Seite 19

INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Product description: General description
The unit offers the possibility to swap the directions of the airflows so that there are two
Airflows
operating modes:
• Mode A
• Mode B
The inputs and outputs of the airflows in the two operating modes are depicted in the
following figures:
By default, the ducts on the side and bottom of the unit are closed but can be opened and
used as shown below. When opening the ducts on the side or on the bottom, the
corresponding ducts that are not used are usually closed. If required, two corresponding
ducts can be used simultaneously.
The standard operating mode is mode A.
Fig. 9: Airflows in mode A
Fig. 10: Airflows in mode B
Colour (arrows)
green
red
yellow
brown
Designation of the airflow
T1
T2
T3
T4
Description
Outside air
Supply air
Extract air
Exhaust air
19