Dantherm RCV320 P1 Benutzerhandbuch Seite 41

INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Installation: Assembly
3. Set up the unit and ensure that it is aligned horizontally. Note: The top edge must not
Mounting the When the unit is delivered, the condensate drains are closed. When installing the unit, the
correct drain must be opened and a condensation drain hose must be fitted:
condensation drain
hose
1. Open the unit and check which operating mode (A/B) is set on the switch of the
be inclined backwards as this may cause moisture damages.
Fig. 44: Setting up the unit horizontally
main PCB. If necessary, adjust the switch position to your preferred operating mode.
Fig. 45: Checking the operating mode
B A
41