Replacement Parts; Removing The Built-In Rechargeable Battery - Panasonic ES-LT31 Bedienungsanleitung

Replacing the system outer foil and the inner blades
system outer foil
inner blades
►Replacing the system outer foil ►
1. Press the foil frame release buttons and lift
the outer foil section upwards.
2. Press the system outer foil release buttons
and pull down the system outer foil.
3. Align the foil frame mark (
system outer foil mark ( ) and securely
attach together.
•►The system outer foil cannot be reversely
attached.
•►Always insert the system outer foil to the
foil frame when attaching to the shaver.
4. After turning the foil frame mark (
front, securely attach the outer foil section to
the shaver until it clicks.
►Replacing the inner blades ►
1. Press the foil frame release buttons and lift
the outer foil section upwards.
2. Remove the inner blades one at a time.
•►Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until
they click.
once every year
once every two years
1
) and the
2 3
) to the
1
2 3
►Replacement parts ►
Replacement parts are available at your dealer or Service Center.
System outer foil and inner
blades
Replacement parts for
ES‑LT31 System outer foil
Inner blades
Removing the built‑in rechargeable battery
Remove the built‑in rechargeable battery before disposing of the
shaver. Please make sure that the battery is disposed of at an
officially designated location if there is one. Do not dismantle or
replace the battery so that you can use the shaver again. This
could cause fire or an electric shock.
Please contact an authorised service center.
•►Disconnect the power cord from the shaver when removing the
battery.
•►Perform steps 1 to 4 and lift the battery, and then remove it.
WES9013
WES9087
WES9068




7