Cleaning The Shaver; Cleaning With The Brush - Panasonic ES-LT31 Bedienungsanleitung

Clean
Cleaning the shaver
1. Disconnect the power cord from the
shaver.
2. Apply some hand soap and some
water to the outer foil.
3. Rotate the lock ring to unlock the
power switch.
4. Press the power switch for more than 2
seconds to activate the sonic vibration
cleaning mode.
•►The battery capacity lamps blink in
order.
•►After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power
switch.
5. Remove the outer foil section and
press the power switch for more than 2
seconds to activate the sonic vibration
cleaning mode and clean it with
running water.
6. Wipe off any drops of water with a dry
cloth.
7. Dry the outer foil section and the
shaver completely.
8. Attach the outer foil section to the
shaver.
9. Lubricate the shaver.
6
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
4
1. Switch off the shaver.
2. Apply one drop of oil to each of the outer foils.
3. Raise the trimmer and apply a drop of oil.
4. Switch the shaver on, and run it for approximately
five seconds.
5. Switch off the shaver, and wipe off any excess oil
from the outer foils with a soft cloth.
5
Cleaning with the brush
Clean the inner blades using the short brush
by moving it in direction (A).
Clean the system outer foil, the shaver body
and the trimmer using the long brush.
•►Do not move the short brush in direction (B)
7
as it will damage the inner blades and affect
their sharpness.
•►Do not use the short brush to clean the outer
foils.
2
3
(A)
(B)