Ego Power+ ZERO TURN ZT5200E-L Bedienungsanleitung Seite 34

EN
LCD
Description
Display
The temperature icon blinks.
The temperature icon and
the exact occupied battery
compartment blink at the same
time.
The icons of each occupied
battery compartment, low power
indicator, battery graphics of
fuel gauge blink every 1 second
at the same time on the LCD
screen. The first segment of the
LED fuel-gauge & status indicator
blinks too.
The icon of each occupied
battery compartment and low
power indicator blinks every half
a second.
The auto-parking icon blinks on
the LCD.
Brake pedal icon is displayed on
the LCD.
34
ZERO TURN RIDE-ON MOWER — ZT5200E-L
Mower
Status Beeper Cause
Indicator
The mower is over
heated.
OFF One beep
The mower is too cold
The battery pack in
the cor- responding
OFF No numbered battery
compart- ment is
overheated.
Keeps
beeping The battery packs are
until the low on charge and the
Flashes red
PTO switch mower is in Limp-
is pushed Home mode.
downward.
Keeps The battery parks are
Flashes red
beeping nearly depleted.
The mower is parked
on a slope and the
operator leaves the
mower without setting
Keeps
OFF the brake pedal at
beeping
the braking position,
just with the steering
levers in the open
position.
The parking brake
OFF No pedal is set at the
braking position.
Solution
Reduce the load of the mower by raising
the deck cutting height or slowing down
the blade/driving speed. Take a break and
allow the mower to cool.
Please do not make repeated attempts
which may damage the machine. Always
store the mower and batteries in warm
environment. Restart the mower when it
is warmed up.
1. The mower can continue working if the
combined battery Ah rating, overheated
battery excluded, meets the requirement.
Once the overheated battery returns
to normal temperature, it will join in
powering the mower immediately.
2. If the combined battery Ah rating not
sufficient, the mower will not work until
more battery packs are inserted into the
vacant battery compartments.
3. Reduce the load of the mower by
raising the deck cutting height or slowing
down the mowing when resuming
operation.
Stop working and return to the battery
charging area.
NOTICE: When the mower is in Limp-
Home mode, the blades are automatically
switched into low rotation speed without
grass cutting and meanwhile the sound
indicator will keep beeping. The operator
should push the PTO switch downward
to disengage the deck blades. The sound
indicator will stop beeping after blade
stopping.
The mower will stop working
immediately. The operator should
transport the mower to the battery
charging area for charging.
Set the brake pedal at the braking
position. The auto-parking icon will be off
and the sound indicator will stop beeping.
Release it before starting the mower.