Ego Power+ ZERO TURN ZT5200E-L Bedienungsanleitung Seite 29

TROUBLESHOOTING
PROBLEM CAUSE
◾
◾
◾
The mower fails to drive
◾
when the two steering
levers are pushed forward or
backward at the beginning.
◾
Steering level icon blinks
◾
◾
◾
◾
The mower stops driving.
◾
The driving speed/driving ◾
mode cannot be adjusted
during driving.
The combined Ah of the inserted
batteries does not meet the
requirement.
The parking brake pedal is set in the
braking position.
The steering levers are not in the
open position when starting the
mower.
The operator is not sitting on the
seat.
The seat switch is not connected
correctly.
Under extreme cold weather,
the driving function may not
start successfully due to the low
temperature protection.
Steering levers require a "reset".
The electric controlling components
of the steering levers are failed.
The seat switch got disconnected
during driving on a rough terrain.
The parking-brake pedal is
depressed to slow down the driving
speed. Once the parking-brake pedal
is depressed enough but not to the
parking position, the mower will
stop.
This is a feature of the mower for
safe driving.
SOLUTION
◾
In order to start this mower, use enough EGO batteries following
the instructions in section "CHARGING" in this manual.
◾
Fully depress the parking brake pedal to release it from the
braking position.
◾
Return the steering levers to the open position and restart the
mower.
◾
Only when the operator is properly sitting on the seat, can he or
she operate the mower.
◾
Remove the battery from the mower and disassemble the seat
in the reverse order of the instructions in section "INSTALLING
THE SEAT" in this manual to inspect the seat switch connection.
Reassemble the seat and follow the instructions in "STARTING
THE MOWER" to restart the mower to see if the mower can be
started. If not, contact a qualified service technician for repair.
◾
Always store the mower and battery in warm environment. Restart
the mower when it is warmed up. Please do not make repeated
attempts under extreme cold weather which may damage the
machine.
◾
Return the steering levers to the open position and restart the
mower.
◾
Contact a qualified service technician for repair.
◾
Remove the battery from the mower and disassemble the seat in the
reverse order of the instructions in section "INSTALLING THE SEAT"
in this manual to inspect the seat switch connection. Reassemble
the seat and follow the instructions in "STARTING THE MOWER" to
restart the mower to see if the mower can be started. If not, contact
a qualified service technician for repair.
◾
Follow the instructions in "STARTING THE MOWER" to restart the
mower.
◾
The function will activate only when the mower wheels are
stopped and the steering levers are open.
ZERO TURN RIDE-ON MOWER — ZT5200E-L
EN
29