Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AC motor 230 V/ 50 Hz
Mains voltage 230 Volt / 50 Hz.
The mains connection and the extension
cable have to be three-core cables = P +
N + SL. - (1/N/PE). Extension cables must
have a minimum cross-section of 1.5 mm².
Mains fuse protection is 16 A maximum.
Three-phase motor 400 V / 50 Hz
Mains voltage 400 V / 50 Hz
Mains voltage and extension cables must
be 5-lead (3P + N + SL (3/N/PE).
Extension cables must have a minimum
cross-section of 1.5 mm².
Mains fuse protection is 16 A maximum.
When connecting to the mains or relocating
the machine, check the direction of rota-
tion (swap polarity in the wall socket if nec-
essary). Turn pole inverter in the machine
socket.. (Fig. O)
• The product meets the requirements of
EN 61000-3-11 and is subject to special
connection conditions. This means that
use of the product at any freely selecta-
ble connection point is not allowed.
• Given unfavorable conditions in the pow-
er supply the product can cause the volt-
age to fuctuate temporarily.
• The product is intended solely for use at
connection points that
a) do not exceed a maximum permitted
supply impedance "Z", or
b) have a continuous current-carrying ca-
pacity of the mains of at least 100 A per
phase.
• As the user, you are required to ensure,
in consultation with your electric power
company if necessary, that the connec-
tion point at which you wish to operate
the product meets one of the two require-
ments, a) or b), named above.
12. Cleaning
Attention!
Pull out the power plug before carrying out
any cleaning work on the equipment.
We recommend that you clean the equip-
ment immediately after you use it.
Clean the equipment regularly with a damp
cloth and some soft soap. Do not use
cleaning agents or solvents; these may be
aggressive to the plastic parts in the equip-
ment. Ensure that no water can get into the
interior of the equipment.
13. Transport
Transport by hand (Fig D)
For transport, the splitting knife (a) must be
completely moved down. Slightly tilt the log
splitter with handle (b) on the splitting col-
umn until the machine is inclined on the
wheels and can be moved.
Transport by crane:
Never lift the machine on the splitting
knife!
GB
33
Werbung
