Werock Rocksmart RSC600 Bedienungsanleitung Seite 97

ACPI Settings
ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the SUSPEND button is
pressed.
The optional settings: [Suspend Disabled]; [S3 (Suspend to RAM)].
Super IO Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
Serial Port 1 Configuration
Press [Enter] to make settings for the following items:
Serial Port 1 Configuration
Serial Port
Use this item to enable or disable Serial Port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for Super IO Device.
The optional settings: [Auto]; [IO=3F8h; IRQ=4;]; [IO=2F8h; IRQ=3;]; [IO=3E8h; IRQ=4;]; [IO=2E8h;
IRQ=3;].
Transmission Mode Select
The optional settings: [RS422]; [RS232]; [RS485].
Mode Speed Select
Use this item to select RS232/RS422/RS485 Speed Select.
The optional
[RS232=1Mbps, RS422/RS485=10Mbps].
Serial Port 2 Configuration
Press [Enter] to make settings for the following items:
Serial Port 2 Configuration
Serial Port
Use this item to enable or disable Serial Port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for Super IO Device.
The optional settings: [Auto]; [IO=3F8h; IRQ=4;]; [IO=2F8h; IRQ=3;]; [IO=3E8h; IRQ=4;]; [IO=2E8h;
IRQ=3;];.
Serial Port 3/ Serial Port 4 Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable Serial Port (COM).
The optional settings: [Disabled]; [Enabled].
Rocksmart RSC600 User Manual
settings: [RS232/RS422/RS485=250Kbps];
97 / 110